RMA House inlet – underground
RMA house connection for the underground installation of the pipe into the building.
Available in both rigid (basement wall) and flexible (floor slab) versions.
DIN-DVGW no.: DG-4540AU0194
Test basis; DVGW VP 601 (01.03.2007)
Complies with all requirements of TRF 2012
TECHNICAL DATA
- Pressure class: PN4
- Nominal width: DN25
- Inlet: PE32
- Wall opening: min. 80 mm
- Equipment: with AVR valve 1”IG
- Maximum bending radius (in mm)
at 20°C: 640 mm
at 10°C: 1100 mm
at 0°C: 1600 mm - Outlet: 1″ female thread
- Wall thickness house entry flex: 300-400 mm
- Wall thickness house entry rigid: 300-470 mm
- Length flex: 1500 mm
- Length rigid: 730 mm
PRODUCT TYPES
Description | Inlet | Outlet | NW | Order Number |
WDF-rma-730-mm-ridgid (with AVR angle valve-90°) |
PE32 | G 1″ | DN 25 | 1 00 093 01 730 0 |
WDF-rma-730-mm-ridgid (with AVR angle valve-45°) |
PE32 | G 1″ | DN 25 | 1 00 093 01 730 1 |
WDF-rma-1500mm-flex (with AVR angle valve-90°) |
PE32 | G 1″ | DN 25 | 1 00 093 02 1500 0 |
WDF-rma-1500mm-VA-flex (with AVR angle valve-90°) |
PE32 | G 1″ | DN 25 | 1 00 093 02 1500 1 |
Accessories | Order Number |
Wall bracket 2-leg DN25 for WDF-rma | 1 00 093 01 022 0 |
Support bracket-3-leg-DN25 for WDF-rma | 1 00 093 01 033 0 |
RMA house connection set-with-threaded cap | 1 00 093 01 044 1 |
RMA spouting device complete DN25 (KETH-S/PE) | 1 00 093 01 400 0 |
RMA foam mat DN25 for spouting device (white) | 1 00 093 01 410 0 |
RMA foam mat DN25 closed on one side (black) | 1 00 093 01 420 0 |
RMA centring ring DN 25 AD105/100 / ID63 | 1 00 093 01 440 0 |
RMA centring ring DN 25 AD95/90 / ID63 | 1 00 093 01 450 0 |
RMA potting compound GMD-F 5 KG bucket | 1 00 093 01 500 0 |
Tangit 3000 – 300 ml | 1 00 093 01 300 0 |
Tangit 3000 – 150 ml | 1 00 093 01 150 0 |
Squeeze-out sleeve for Tangit 3000 – 150 ml | 1 00 093 01 150 1 |
Heat shrink tubing 65 x 1.2 x 250 mm | 9 00 090 12 025 0 |
Heat shrink tubing 65 x 1.2 x 330 mm | 9 00 090 12 000 0 |
Heat shrink tubing 65 x 1,2 x 1000 mm | 9 00 090 12 100 0 |